====================================================================
  HIGH COUNTRY TOOLS
  Ultralight Hobby Tool Library  |  Vectric VCarve / Aspire  |  v9.26
====================================================================

CONTENTS
--------------------------------------------------------------------
  File           HCT_vectric_Ultralight-Hobby_v9.26.vtdb
  Tools          69 High Country Tools cutters
  Materials      9, with feeds and speeds for every tool
  Requires       Vectric VCarve or Aspire V11 or later

INTENDED MACHINES
--------------------------------------------------------------------
  Genmitsu  |  SainSmart  |  FoxAlien  |  3018-class machines

  If your machine is not listed, identify your class by its drive
  system rather than its brand:

    Ballscrew or rack-and-pinion on rails      Rigid Hobby
    Belts or V-wheels on aluminum extrusion    Light Hobby
    3018-size desktop kit                      Ultralight Hobby
    Welded steel frame, 3-5 hp spindle         Business Class
    Cast frame, servo drives, 7 hp and up      Industrial

INSTALLATION
--------------------------------------------------------------------
  1. In VCarve or Aspire, open the Toolpaths tab.
  2. Click the Tool Database icon.
  3. Click the folder icon at the bottom of the Tool Database window,
     select HCT_vectric_Ultralight-Hobby_v9.26.vtdb, and click Open.

  A group named "High Country Tools - Ultralight Hobby" is added to your
  tool database.

  4. Set Machine (top right) to "High Country Tools - Ultralight Hobby".
  5. Set Material (top left) to the stock you are cutting.

  Steps 4 and 5 are required. With any other machine or material
  selected, VCarve displays "Copy Settings From" and the tool appears
  to have no feeds. That reflects the current selection, not the file.

MATERIALS
--------------------------------------------------------------------
  Hardwood
  Hardwood - Dense (maple, oak, ash)
  Softwood (pine, cedar, fir)
  Plywood - Baltic birch
  Plywood - Melamine / laminate
  MDF / particleboard
  Acrylic / PVC (hard plastic)
  HDPE / UHMW / nylon (soft plastic)
  Epoxy / resin

  Aluminum is intentionally excluded from this class. A frame this
  light cannot hold a cutter steady enough to machine it safely.

DATA SOURCE
--------------------------------------------------------------------
  Feeds and speeds were measured in our shop on a Onefinity Elite
  (Masso) Journeyman - the Rigid Hobby class - then scaled to
  Ultralight Hobby by a 0.45x feed and 0.40x depth factor.

  That scale is engineering judgment rather than a measurement
  taken on a machine of this class. Treat every value as a
  starting point.

  The following are not based on in-house cutting:

    Dovetail and       Cut at full depth in a single pass and
    keyhole bits       derived conservatively. Prove them in scrap
                       before production work.

TUNING
--------------------------------------------------------------------
  Run the first pass as supplied. Increase the feed until you hear
  chatter, reduce it by 10-15%, and save the result as your setting
  for that material. Spindle power, workholding, tool stickout and
  frame condition all affect the outcome.

SHARE YOUR RESULTS
--------------------------------------------------------------------
  These libraries improve with real cutting data. If you tune a tool
  and it performs well, send us the tool, material, machine, feed
  rate, spindle speed and depth of cut. Verified customer data is
  incorporated into future releases.

RESOURCES
--------------------------------------------------------------------
  Shop         https://www.highcountrytool.com/shop
  Calculator   https://www.highcountrytool.com/feeds-speeds-calculator
  Support      support@highcountrytool.com

====================================================================
  High Country Tools is not responsible for tool breakage resulting
  from feeds and speeds. Every machine is unique; tuning tool
  settings is the responsibility of the user.
====================================================================
